/* * BCM47XX NAND flash driver * * Copyright (C) 2012 Rafał Miłecki * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include "bcm47xxnflash.h" #include #include #include #include #include /* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has * shown ~1000 retries as maxiumum. */ #define NFLASH_READY_RETRIES 10000 #define NFLASH_SECTOR_SIZE 512 #define NCTL_CMD0 0x00010000 #define NCTL_COL 0x00020000 /* Update column with value from BCMA_CC_NFLASH_COL_ADDR */ #define NCTL_ROW 0x00040000 /* Update row (page) with value from BCMA_CC_NFLASH_ROW_ADDR */ #define NCTL_CMD1W 0x00080000 #define NCTL_READ 0x00100000 #define NCTL_WRITE 0x00200000 #define NCTL_SPECADDR 0x01000000 #define NCTL_READY 0x04000000 #define NCTL_ERR 0x08000000 #define NCTL_CSA 0x40000000 #define NCTL_START 0x80000000 /************************************************** * Various helpers **************************************************/ static inline u8 bcm47xxnflash_ops_bcm4706_ns_to_cycle(u16 ns, u16 clock) { return ((ns * 1000 * clock) / 1000000) + 1; } static int bcm47xxnflash_ops_bcm4706_ctl_cmd(struct bcma_drv_cc *cc, u32 code) { int i = 0; bcma_cc_write32(cc, BCMA_CC_NFLASH_CTL, NCTL_START | code); for (i = 0; i < NFLASH_READY_RETRIES; i++) { if (!(bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_START)) { i = 0; break; } } if (i) { pr_err("NFLASH control command not ready!\n"); return -EBUSY; } return 0; } static int bcm47xxnflash_ops_bcm4706_poll(struct bcma_drv_cc *cc) { int i; for (i = 0; i < NFLASH_READY_RETRIES; i++) { if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_READY) { if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & BCMA_CC_NFLASH_CTL_ERR) { pr_err("Error on polling\n"); return -EBUSY; } else { return 0; } } } pr_err("Polling timeout!\n"); return -EBUSY; } /************************************************** * R/W **************************************************/ static void bcm47xxnflash_ops_bcm4706_read(struct mtd_info *mtd, uint8_t *buf, int len) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); u32 ctlcode; u32 *dest = (u32 *)buf; int i; int toread; BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask); /* Don't validate column using nand_chip->page_shift, it may be bigger * when accessing OOB */ while (len) { /* We can read maximum of 0x200 bytes at once */ toread = min(len, 0x200); /* Set page and column */ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_COL_ADDR, b47n->curr_column); bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_ROW_ADDR, b47n->curr_page_addr); /* Prepare to read */ ctlcode = NCTL_CSA | NCTL_CMD1W | NCTL_ROW | NCTL_COL | NCTL_CMD0; ctlcode |= NAND_CMD_READSTART << 8; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) return; if (bcm47xxnflash_ops_bcm4706_poll(b47n->cc)) return; /* Eventually read some data :) */ for (i = 0; i < toread; i += 4, dest++) { ctlcode = NCTL_CSA | 0x30000000 | NCTL_READ; if (i == toread - 4) /* Last read goes without that */ ctlcode &= ~NCTL_CSA; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) return; *dest = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA); } b47n->curr_column += toread; len -= toread; } } static void bcm47xxnflash_ops_bcm4706_write(struct mtd_info *mtd, const uint8_t *buf, int len) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); struct bcma_drv_cc *cc = b47n->cc; u32 ctlcode; const u32 *data = (u32 *)buf; int i; BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask); /* Don't validate column using nand_chip->page_shift, it may be bigger * when accessing OOB */ for (i = 0; i < len; i += 4, data++) { bcma_cc_write32(cc, BCMA_CC_NFLASH_DATA, *data); ctlcode = NCTL_CSA | 0x30000000 | NCTL_WRITE; if (i == len - 4) /* Last read goes without that */ ctlcode &= ~NCTL_CSA; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) { pr_err("%s ctl_cmd didn't work!\n", __func__); return; } } b47n->curr_column += len; } /************************************************** * NAND chip ops **************************************************/ static void bcm47xxnflash_ops_bcm4706_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); u32 code = 0; if (cmd == NAND_CMD_NONE) return; if (cmd & NAND_CTRL_CLE) code = cmd | NCTL_CMD0; /* nCS is not needed for reset command */ if (cmd != NAND_CMD_RESET) code |= NCTL_CSA; bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, code); } /* Default nand_select_chip calls cmd_ctrl, which is not used in BCM4706 */ static void bcm47xxnflash_ops_bcm4706_select_chip(struct mtd_info *mtd, int chip) { return; } static int bcm47xxnflash_ops_bcm4706_dev_ready(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); return !!(bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_CTL) & NCTL_READY); } /* * Default nand_command and nand_command_lp don't match BCM4706 hardware layout. * For example, reading chip id is performed in a non-standard way. * Setting column and page is also handled differently, we use a special * registers of ChipCommon core. Hacking cmd_ctrl to understand and convert * standard commands would be much more complicated. */ static void bcm47xxnflash_ops_bcm4706_cmdfunc(struct mtd_info *mtd, unsigned command, int column, int page_addr) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); struct bcma_drv_cc *cc = b47n->cc; u32 ctlcode; int i; if (column != -1) b47n->curr_column = column; if (page_addr != -1) b47n->curr_page_addr = page_addr; switch (command) { case NAND_CMD_RESET: nand_chip->cmd_ctrl(mtd, command, NAND_CTRL_CLE); ndelay(100); nand_wait_ready(mtd); break; case NAND_CMD_READID: ctlcode = NCTL_CSA | 0x01000000 | NCTL_CMD1W | NCTL_CMD0; ctlcode |= NAND_CMD_READID; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) { pr_err("READID error\n"); break; } /* * Reading is specific, last one has to go without NCTL_CSA * bit. We don't know how many reads NAND subsystem is going * to perform, so cache everything. */ for (i = 0; i < ARRAY_SIZE(b47n->id_data); i++) { ctlcode = NCTL_CSA | NCTL_READ; if (i == ARRAY_SIZE(b47n->id_data) - 1) ctlcode &= ~NCTL_CSA; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) { pr_err("READID error\n"); break; } b47n->id_data[i] = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA) & 0xFF; } break; case NAND_CMD_STATUS: ctlcode = NCTL_CSA | NCTL_CMD0 | NAND_CMD_STATUS; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) pr_err("STATUS command error\n"); break; case NAND_CMD_READ0: break; case NAND_CMD_READOOB: if (page_addr != -1) b47n->curr_column += mtd->writesize; break; case NAND_CMD_ERASE1: bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR, b47n->curr_page_addr); ctlcode = NCTL_ROW | NCTL_CMD1W | NCTL_CMD0 | NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8); if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) pr_err("ERASE1 failed\n"); break; case NAND_CMD_ERASE2: break; case NAND_CMD_SEQIN: /* Set page and column */ bcma_cc_write32(cc, BCMA_CC_NFLASH_COL_ADDR, b47n->curr_column); bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR, b47n->curr_page_addr); /* Prepare to write */ ctlcode = 0x40000000 | NCTL_ROW | NCTL_COL | NCTL_CMD0; ctlcode |= NAND_CMD_SEQIN; if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) pr_err("SEQIN failed\n"); break; case NAND_CMD_PAGEPROG: if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_CMD0 | NAND_CMD_PAGEPROG)) pr_err("PAGEPROG failed\n"); if (bcm47xxnflash_ops_bcm4706_poll(cc)) pr_err("PAGEPROG not ready\n"); break; default: pr_err("Command 0x%X unsupported\n", command); break; } b47n->curr_command = command; } static u8 bcm47xxnflash_ops_bcm4706_read_byte(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); struct bcma_drv_cc *cc = b47n->cc; u32 tmp = 0; switch (b47n->curr_command) { case NAND_CMD_READID: if (b47n->curr_column >= ARRAY_SIZE(b47n->id_data)) { pr_err("Requested invalid id_data: %d\n", b47n->curr_column); return 0; } return b47n->id_data[b47n->curr_column++]; case NAND_CMD_STATUS: if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_READ)) return 0; return bcma_cc_read32(cc, BCMA_CC_NFLASH_DATA) & 0xff; case NAND_CMD_READOOB: bcm47xxnflash_ops_bcm4706_read(mtd, (u8 *)&tmp, 4); return tmp & 0xFF; } pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command); return 0; } static void bcm47xxnflash_ops_bcm4706_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); switch (b47n->curr_command) { case NAND_CMD_READ0: case NAND_CMD_READOOB: bcm47xxnflash_ops_bcm4706_read(mtd, buf, len); return; } pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command); } static void bcm47xxnflash_ops_bcm4706_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct bcm47xxnflash *b47n = nand_get_controller_data(nand_chip); switch (b47n->curr_command) { case NAND_CMD_SEQIN: bcm47xxnflash_ops_bcm4706_write(mtd, buf, len); return; } pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command); } /************************************************** * Init **************************************************/ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n) { struct nand_chip *nand_chip = (struct nand_chip *)&b47n->nand_chip; int err; u32 freq; u16 clock; u8 w0, w1, w2, w3, w4; unsigned long chipsize; /* MiB */ u8 tbits, col_bits, col_size, row_bits, row_bsize; u32 val; b47n->nand_chip.select_chip = bcm47xxnflash_ops_bcm4706_select_chip; nand_chip->cmd_ctrl = bcm47xxnflash_ops_bcm4706_cmd_ctrl; nand_chip->dev_ready = bcm47xxnflash_ops_bcm4706_dev_ready; b47n->nand_chip.cmdfunc = bcm47xxnflash_ops_bcm4706_cmdfunc; b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte; b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf; b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf; b47n->nand_chip.set_features = nand_get_set_features_notsupp; b47n->nand_chip.get_features = nand_get_set_features_notsupp; nand_chip->chip_delay = 50; b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH; b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */ /* Enable NAND flash access */ bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG, BCMA_CC_4706_FLASHSCFG_NF1); /* Configure wait counters */ if (b47n->cc->status & BCMA_CC_CHIPST_4706_PKG_OPTION) { /* 400 MHz */ freq = 400000000 / 4; } else { freq = bcma_chipco_pll_read(b47n->cc, 4); freq = (freq & 0xFFF) >> 3; /* Fixed reference clock 25 MHz and m = 2 */ freq = (freq * 25000000 / 2) / 4; } clock = freq / 1000000; w0 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(15, clock); w1 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(20, clock); w2 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock); w3 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock); w4 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(100, clock); bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_WAITCNT0, (w4 << 24 | w3 << 18 | w2 << 12 | w1 << 6 | w0)); /* Scan NAND */ err = nand_scan(nand_to_mtd(&b47n->nand_chip), 1); if (err) { pr_err("Could not scan NAND flash: %d\n", err); goto exit; } /* Configure FLASH */ chipsize = b47n->nand_chip.chipsize >> 20; tbits = ffs(chipsize); /* find first bit set */ if (!tbits || tbits != fls(chipsize)) { pr_err("Invalid flash size: 0x%lX\n", chipsize); err = -ENOTSUPP; goto exit; } tbits += 19; /* Broadcom increases *index* by 20, we increase *pos* */ col_bits = b47n->nand_chip.page_shift + 1; col_size = (col_bits + 7) / 8; row_bits = tbits - col_bits + 1; row_bsize = (row_bits + 7) / 8; val = ((row_bsize - 1) << 6) | ((col_size - 1) << 4) | 2; bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_CONF, val); exit: if (err) bcma_cc_mask32(b47n->cc, BCMA_CC_4706_FLASHSCFG, ~BCMA_CC_4706_FLASHSCFG_NF1); return err; }