/* * Copyright (C) 2015 Free Electrons * Copyright (C) 2015 NextThing Co * * Maxime Ripard * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sun4i_crtc.h" #include "sun4i_dotclock.h" #include "sun4i_drv.h" #include "sun4i_lvds.h" #include "sun4i_rgb.h" #include "sun4i_tcon.h" #include "sun6i_mipi_dsi.h" #include "sunxi_engine.h" static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder) { struct drm_connector *connector; struct drm_connector_list_iter iter; drm_connector_list_iter_begin(encoder->dev, &iter); drm_for_each_connector_iter(connector, &iter) if (connector->encoder == encoder) { drm_connector_list_iter_end(&iter); return connector; } drm_connector_list_iter_end(&iter); return NULL; } static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder) { struct drm_connector *connector; struct drm_display_info *info; connector = sun4i_tcon_get_connector(encoder); if (!connector) return -EINVAL; info = &connector->display_info; if (info->num_bus_formats != 1) return -EINVAL; switch (info->bus_formats[0]) { case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: return 18; case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: return 24; } return -EINVAL; } static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, bool enabled) { struct clk *clk; switch (channel) { case 0: WARN_ON(!tcon->quirks->has_channel_0); regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, SUN4I_TCON0_CTL_TCON_ENABLE, enabled ? SUN4I_TCON0_CTL_TCON_ENABLE : 0); clk = tcon->dclk; break; case 1: WARN_ON(!tcon->quirks->has_channel_1); regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG, SUN4I_TCON1_CTL_TCON_ENABLE, enabled ? SUN4I_TCON1_CTL_TCON_ENABLE : 0); clk = tcon->sclk1; break; default: DRM_WARN("Unknown channel... doing nothing\n"); return; } if (enabled) { clk_prepare_enable(clk); clk_rate_exclusive_get(clk); } else { clk_rate_exclusive_put(clk); clk_disable_unprepare(clk); } } static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon, const struct drm_encoder *encoder, bool enabled) { if (enabled) { u8 val; regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, SUN4I_TCON0_LVDS_IF_EN, SUN4I_TCON0_LVDS_IF_EN); /* * As their name suggest, these values only apply to the A31 * and later SoCs. We'll have to rework this when merging * support for the older SoCs. */ regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, SUN6I_TCON0_LVDS_ANA0_C(2) | SUN6I_TCON0_LVDS_ANA0_V(3) | SUN6I_TCON0_LVDS_ANA0_PD(2) | SUN6I_TCON0_LVDS_ANA0_EN_LDO); udelay(2); regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, SUN6I_TCON0_LVDS_ANA0_EN_MB, SUN6I_TCON0_LVDS_ANA0_EN_MB); udelay(2); regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, SUN6I_TCON0_LVDS_ANA0_EN_DRVC, SUN6I_TCON0_LVDS_ANA0_EN_DRVC); if (sun4i_tcon_get_pixel_depth(encoder) == 18) val = 7; else val = 0xf; regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf), SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val)); } else { regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, SUN4I_TCON0_LVDS_IF_EN, 0); } } void sun4i_tcon_set_status(struct sun4i_tcon *tcon, const struct drm_encoder *encoder, bool enabled) { bool is_lvds = false; int channel; switch (encoder->encoder_type) { case DRM_MODE_ENCODER_LVDS: is_lvds = true; /* Fallthrough */ case DRM_MODE_ENCODER_DSI: case DRM_MODE_ENCODER_NONE: channel = 0; break; case DRM_MODE_ENCODER_TMDS: case DRM_MODE_ENCODER_TVDAC: channel = 1; break; default: DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n"); return; } if (is_lvds && !enabled) sun4i_tcon_lvds_set_status(tcon, encoder, false); regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_TCON_ENABLE, enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0); if (is_lvds && enabled) sun4i_tcon_lvds_set_status(tcon, encoder, true); sun4i_tcon_channel_set_status(tcon, channel, enabled); } void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable) { u32 mask, val = 0; DRM_DEBUG_DRIVER("%sabling VBLANK interrupt\n", enable ? "En" : "Dis"); mask = SUN4I_TCON_GINT0_VBLANK_ENABLE(0) | SUN4I_TCON_GINT0_VBLANK_ENABLE(1) | SUN4I_TCON_GINT0_TCON0_TRI_FINISH_ENABLE; if (enable) val = mask; regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG, mask, val); } EXPORT_SYMBOL(sun4i_tcon_enable_vblank); /* * This function is a helper for TCON output muxing. The TCON output * muxing control register in earlier SoCs (without the TCON TOP block) * are located in TCON0. This helper returns a pointer to TCON0's * sun4i_tcon structure, or NULL if not found. */ static struct sun4i_tcon *sun4i_get_tcon0(struct drm_device *drm) { struct sun4i_drv *drv = drm->dev_private; struct sun4i_tcon *tcon; list_for_each_entry(tcon, &drv->tcon_list, list) if (tcon->id == 0) return tcon; dev_warn(drm->dev, "TCON0 not found, display output muxing may not work\n"); return NULL; } void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel, const struct drm_encoder *encoder) { int ret = -ENOTSUPP; if (tcon->quirks->set_mux) ret = tcon->quirks->set_mux(tcon, encoder); DRM_DEBUG_DRIVER("Muxing encoder %s to CRTC %s: %d\n", encoder->name, encoder->crtc->name, ret); } static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode, int channel) { int delay = mode->vtotal - mode->vdisplay; if (mode->flags & DRM_MODE_FLAG_INTERLACE) delay /= 2; if (channel == 1) delay -= 2; delay = min(delay, 30); DRM_DEBUG_DRIVER("TCON %d clock delay %u\n", channel, delay); return delay; } static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { /* Configure the dot clock */ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); /* Set the resolution */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) | SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay)); } static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon, struct mipi_dsi_device *device, const struct drm_display_mode *mode) { u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format); u8 lanes = device->lanes; u32 block_space, start_delay; u32 tcon_div; tcon->dclk_min_div = 4; tcon->dclk_max_div = 127; sun4i_tcon0_mode_set_common(tcon, mode); regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, SUN4I_TCON0_CTL_IF_MASK, SUN4I_TCON0_CTL_IF_8080); regmap_write(tcon->regs, SUN4I_TCON_ECC_FIFO_REG, SUN4I_TCON_ECC_FIFO_EN); regmap_write(tcon->regs, SUN4I_TCON0_CPU_IF_REG, SUN4I_TCON0_CPU_IF_MODE_DSI | SUN4I_TCON0_CPU_IF_TRI_FIFO_FLUSH | SUN4I_TCON0_CPU_IF_TRI_FIFO_EN | SUN4I_TCON0_CPU_IF_TRI_EN); /* * This looks suspicious, but it works... * * The datasheet says that this should be set higher than 20 * * pixel cycle, but it's not clear what a pixel cycle is. */ regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div); tcon_div &= GENMASK(6, 0); block_space = mode->htotal * bpp / (tcon_div * lanes); block_space -= mode->hdisplay + 40; regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG, SUN4I_TCON0_CPU_TRI0_BLOCK_SPACE(block_space) | SUN4I_TCON0_CPU_TRI0_BLOCK_SIZE(mode->hdisplay)); regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI1_REG, SUN4I_TCON0_CPU_TRI1_BLOCK_NUM(mode->vdisplay)); start_delay = (mode->crtc_vtotal - mode->crtc_vdisplay - 10 - 1); start_delay = start_delay * mode->crtc_htotal * 149; start_delay = start_delay / (mode->crtc_clock / 1000) / 8; regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI2_REG, SUN4I_TCON0_CPU_TRI2_TRANS_START_SET(10) | SUN4I_TCON0_CPU_TRI2_START_DELAY(start_delay)); /* * The Allwinner BSP has a comment that the period should be * the display clock * 15, but uses an hardcoded 3000... */ regmap_write(tcon->regs, SUN4I_TCON_SAFE_PERIOD_REG, SUN4I_TCON_SAFE_PERIOD_NUM(3000) | SUN4I_TCON_SAFE_PERIOD_MODE(3)); /* Enable the output on the pins */ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); } static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, const struct drm_encoder *encoder, const struct drm_display_mode *mode) { unsigned int bp; u8 clk_delay; u32 reg, val = 0; WARN_ON(!tcon->quirks->has_channel_0); tcon->dclk_min_div = 7; tcon->dclk_max_div = 7; sun4i_tcon0_mode_set_common(tcon, mode); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 0); regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, SUN4I_TCON0_CTL_CLK_DELAY_MASK, SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); /* * This is called a backporch in the register documentation, * but it really is the back porch + hsync */ bp = mode->crtc_htotal - mode->crtc_hsync_start; DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", mode->crtc_htotal, bp); /* Set horizontal display timings */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, SUN4I_TCON0_BASIC1_H_TOTAL(mode->htotal) | SUN4I_TCON0_BASIC1_H_BACKPORCH(bp)); /* * This is called a backporch in the register documentation, * but it really is the back porch + hsync */ bp = mode->crtc_vtotal - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", mode->crtc_vtotal, bp); /* Set vertical display timings */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | SUN4I_TCON0_BASIC2_V_BACKPORCH(bp)); reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; if (sun4i_tcon_get_pixel_depth(encoder) == 24) reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; else reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS; regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg); /* Setup the polarity of the various signals */ if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val); /* Map output pins to channel 0 */ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, SUN4I_TCON_GCTL_IOMAP_TCON0); /* Enable the output on the pins */ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); } static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { unsigned int bp, hsync, vsync; u8 clk_delay; u32 val = 0; WARN_ON(!tcon->quirks->has_channel_0); tcon->dclk_min_div = 6; tcon->dclk_max_div = 127; sun4i_tcon0_mode_set_common(tcon, mode); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 0); regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, SUN4I_TCON0_CTL_CLK_DELAY_MASK, SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); /* * This is called a backporch in the register documentation, * but it really is the back porch + hsync */ bp = mode->crtc_htotal - mode->crtc_hsync_start; DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", mode->crtc_htotal, bp); /* Set horizontal display timings */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, SUN4I_TCON0_BASIC1_H_TOTAL(mode->crtc_htotal) | SUN4I_TCON0_BASIC1_H_BACKPORCH(bp)); /* * This is called a backporch in the register documentation, * but it really is the back porch + hsync */ bp = mode->crtc_vtotal - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", mode->crtc_vtotal, bp); /* Set vertical display timings */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | SUN4I_TCON0_BASIC2_V_BACKPORCH(bp)); /* Set Hsync and Vsync length */ hsync = mode->crtc_hsync_end - mode->crtc_hsync_start; vsync = mode->crtc_vsync_end - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync); regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG, SUN4I_TCON0_BASIC3_V_SYNC(vsync) | SUN4I_TCON0_BASIC3_H_SYNC(hsync)); /* Setup the polarity of the various signals */ if (mode->flags & DRM_MODE_FLAG_PHSYNC) val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, val); /* Map output pins to channel 0 */ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, SUN4I_TCON_GCTL_IOMAP_TCON0); /* Enable the output on the pins */ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0); } static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { unsigned int bp, hsync, vsync, vtotal; u8 clk_delay; u32 val; WARN_ON(!tcon->quirks->has_channel_1); /* Configure the dot clock */ clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 1); regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG, SUN4I_TCON1_CTL_CLK_DELAY_MASK, SUN4I_TCON1_CTL_CLK_DELAY(clk_delay)); /* Set interlaced mode */ if (mode->flags & DRM_MODE_FLAG_INTERLACE) val = SUN4I_TCON1_CTL_INTERLACE_ENABLE; else val = 0; regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG, SUN4I_TCON1_CTL_INTERLACE_ENABLE, val); /* Set the input resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC0_REG, SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay) | SUN4I_TCON1_BASIC0_Y(mode->crtc_vdisplay)); /* Set the upscaling resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC1_REG, SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay) | SUN4I_TCON1_BASIC1_Y(mode->crtc_vdisplay)); /* Set the output resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC2_REG, SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay) | SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay)); /* Set horizontal display timings */ bp = mode->crtc_htotal - mode->crtc_hsync_start; DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", mode->htotal, bp); regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG, SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) | SUN4I_TCON1_BASIC3_H_BACKPORCH(bp)); bp = mode->crtc_vtotal - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", mode->crtc_vtotal, bp); /* * The vertical resolution needs to be doubled in all * cases. We could use crtc_vtotal and always multiply by two, * but that leads to a rounding error in interlace when vtotal * is odd. * * This happens with TV's PAL for example, where vtotal will * be 625, crtc_vtotal 312, and thus crtc_vtotal * 2 will be * 624, which apparently confuses the hardware. * * To work around this, we will always use vtotal, and * multiply by two only if we're not in interlace. */ vtotal = mode->vtotal; if (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) vtotal = vtotal * 2; /* Set vertical display timings */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG, SUN4I_TCON1_BASIC4_V_TOTAL(vtotal) | SUN4I_TCON1_BASIC4_V_BACKPORCH(bp)); /* Set Hsync and Vsync length */ hsync = mode->crtc_hsync_end - mode->crtc_hsync_start; vsync = mode->crtc_vsync_end - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync); regmap_write(tcon->regs, SUN4I_TCON1_BASIC5_REG, SUN4I_TCON1_BASIC5_V_SYNC(vsync) | SUN4I_TCON1_BASIC5_H_SYNC(hsync)); /* Map output pins to channel 1 */ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, SUN4I_TCON_GCTL_IOMAP_TCON1); } void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, const struct drm_encoder *encoder, const struct drm_display_mode *mode) { struct sun6i_dsi *dsi; switch (encoder->encoder_type) { case DRM_MODE_ENCODER_DSI: /* * This is not really elegant, but it's the "cleaner" * way I could think of... */ dsi = encoder_to_sun6i_dsi(encoder); sun4i_tcon0_mode_set_cpu(tcon, dsi->device, mode); break; case DRM_MODE_ENCODER_LVDS: sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); break; case DRM_MODE_ENCODER_NONE: sun4i_tcon0_mode_set_rgb(tcon, mode); sun4i_tcon_set_mux(tcon, 0, encoder); break; case DRM_MODE_ENCODER_TVDAC: case DRM_MODE_ENCODER_TMDS: sun4i_tcon1_mode_set(tcon, mode); sun4i_tcon_set_mux(tcon, 1, encoder); break; default: DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n"); } } EXPORT_SYMBOL(sun4i_tcon_mode_set); static void sun4i_tcon_finish_page_flip(struct drm_device *dev, struct sun4i_crtc *scrtc) { unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); if (scrtc->event) { drm_crtc_send_vblank_event(&scrtc->crtc, scrtc->event); drm_crtc_vblank_put(&scrtc->crtc); scrtc->event = NULL; } spin_unlock_irqrestore(&dev->event_lock, flags); } static irqreturn_t sun4i_tcon_handler(int irq, void *private) { struct sun4i_tcon *tcon = private; struct drm_device *drm = tcon->drm; struct sun4i_crtc *scrtc = tcon->crtc; struct sunxi_engine *engine = scrtc->engine; unsigned int status; regmap_read(tcon->regs, SUN4I_TCON_GINT0_REG, &status); if (!(status & (SUN4I_TCON_GINT0_VBLANK_INT(0) | SUN4I_TCON_GINT0_VBLANK_INT(1) | SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT))) return IRQ_NONE; drm_crtc_handle_vblank(&scrtc->crtc); sun4i_tcon_finish_page_flip(drm, scrtc); /* Acknowledge the interrupt */ regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG, SUN4I_TCON_GINT0_VBLANK_INT(0) | SUN4I_TCON_GINT0_VBLANK_INT(1) | SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT, 0); if (engine->ops->vblank_quirk) engine->ops->vblank_quirk(engine); return IRQ_HANDLED; } static int sun4i_tcon_init_clocks(struct device *dev, struct sun4i_tcon *tcon) { tcon->clk = devm_clk_get(dev, "ahb"); if (IS_ERR(tcon->clk)) { dev_err(dev, "Couldn't get the TCON bus clock\n"); return PTR_ERR(tcon->clk); } clk_prepare_enable(tcon->clk); if (tcon->quirks->has_channel_0) { tcon->sclk0 = devm_clk_get(dev, "tcon-ch0"); if (IS_ERR(tcon->sclk0)) { dev_err(dev, "Couldn't get the TCON channel 0 clock\n"); return PTR_ERR(tcon->sclk0); } } clk_prepare_enable(tcon->sclk0); if (tcon->quirks->has_channel_1) { tcon->sclk1 = devm_clk_get(dev, "tcon-ch1"); if (IS_ERR(tcon->sclk1)) { dev_err(dev, "Couldn't get the TCON channel 1 clock\n"); return PTR_ERR(tcon->sclk1); } } return 0; } static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon) { clk_disable_unprepare(tcon->sclk0); clk_disable_unprepare(tcon->clk); } static int sun4i_tcon_init_irq(struct device *dev, struct sun4i_tcon *tcon) { struct platform_device *pdev = to_platform_device(dev); int irq, ret; irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "Couldn't retrieve the TCON interrupt\n"); return irq; } ret = devm_request_irq(dev, irq, sun4i_tcon_handler, 0, dev_name(dev), tcon); if (ret) { dev_err(dev, "Couldn't request the IRQ\n"); return ret; } return 0; } static struct regmap_config sun4i_tcon_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .max_register = 0x800, }; static int sun4i_tcon_init_regmap(struct device *dev, struct sun4i_tcon *tcon) { struct platform_device *pdev = to_platform_device(dev); struct resource *res; void __iomem *regs; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); tcon->regs = devm_regmap_init_mmio(dev, regs, &sun4i_tcon_regmap_config); if (IS_ERR(tcon->regs)) { dev_err(dev, "Couldn't create the TCON regmap\n"); return PTR_ERR(tcon->regs); } /* Make sure the TCON is disabled and all IRQs are off */ regmap_write(tcon->regs, SUN4I_TCON_GCTL_REG, 0); regmap_write(tcon->regs, SUN4I_TCON_GINT0_REG, 0); regmap_write(tcon->regs, SUN4I_TCON_GINT1_REG, 0); /* Disable IO lines and set them to tristate */ regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, ~0); regmap_write(tcon->regs, SUN4I_TCON1_IO_TRI_REG, ~0); return 0; } /* * On SoCs with the old display pipeline design (Display Engine 1.0), * the TCON is always tied to just one backend. Hence we can traverse * the of_graph upwards to find the backend our tcon is connected to, * and take its ID as our own. * * We can either identify backends from their compatible strings, which * means maintaining a large list of them. Or, since the backend is * registered and binded before the TCON, we can just go through the * list of registered backends and compare the device node. * * As the structures now store engines instead of backends, here this * function in fact searches the corresponding engine, and the ID is * requested via the get_id function of the engine. */ static struct sunxi_engine * sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv, struct device_node *node, u32 port_id) { struct device_node *port, *ep, *remote; struct sunxi_engine *engine = ERR_PTR(-EINVAL); u32 reg = 0; port = of_graph_get_port_by_id(node, port_id); if (!port) return ERR_PTR(-EINVAL); /* * This only works if there is only one path from the TCON * to any display engine. Otherwise the probe order of the * TCONs and display engines is not guaranteed. They may * either bind to the wrong one, or worse, bind to the same * one if additional checks are not done. * * Bail out if there are multiple input connections. */ if (of_get_available_child_count(port) != 1) goto out_put_port; /* Get the first connection without specifying an ID */ ep = of_get_next_available_child(port, NULL); if (!ep) goto out_put_port; remote = of_graph_get_remote_port_parent(ep); if (!remote) goto out_put_ep; /* does this node match any registered engines? */ list_for_each_entry(engine, &drv->engine_list, list) if (remote == engine->node) goto out_put_remote; /* * According to device tree binding input ports have even id * number and output ports have odd id. Since component with * more than one input and one output (TCON TOP) exits, correct * remote input id has to be calculated by subtracting 1 from * remote output id. If this for some reason can't be done, 0 * is used as input port id. */ of_node_put(port); port = of_graph_get_remote_port(ep); if (!of_property_read_u32(port, "reg", ®) && reg > 0) reg -= 1; /* keep looking through upstream ports */ engine = sun4i_tcon_find_engine_traverse(drv, remote, reg); out_put_remote: of_node_put(remote); out_put_ep: of_node_put(ep); out_put_port: of_node_put(port); return engine; } /* * The device tree binding says that the remote endpoint ID of any * connection between components, up to and including the TCON, of * the display pipeline should be equal to the actual ID of the local * component. Thus we can look at any one of the input connections of * the TCONs, and use that connection's remote endpoint ID as our own. * * Since the user of this function already finds the input port, * the port is passed in directly without further checks. */ static int sun4i_tcon_of_get_id_from_port(struct device_node *port) { struct device_node *ep; int ret = -EINVAL; /* try finding an upstream endpoint */ for_each_available_child_of_node(port, ep) { struct device_node *remote; u32 reg; remote = of_graph_get_remote_endpoint(ep); if (!remote) continue; ret = of_property_read_u32(remote, "reg", ®); if (ret) continue; ret = reg; } return ret; } /* * Once we know the TCON's id, we can look through the list of * engines to find a matching one. We assume all engines have * been probed and added to the list. */ static struct sunxi_engine *sun4i_tcon_get_engine_by_id(struct sun4i_drv *drv, int id) { struct sunxi_engine *engine; list_for_each_entry(engine, &drv->engine_list, list) if (engine->id == id) return engine; return ERR_PTR(-EINVAL); } /* * On SoCs with the old display pipeline design (Display Engine 1.0), * we assumed the TCON was always tied to just one backend. However * this proved not to be the case. On the A31, the TCON can select * either backend as its source. On the A20 (and likely on the A10), * the backend can choose which TCON to output to. * * The device tree binding says that the remote endpoint ID of any * connection between components, up to and including the TCON, of * the display pipeline should be equal to the actual ID of the local * component. Thus we should be able to look at any one of the input * connections of the TCONs, and use that connection's remote endpoint * ID as our own. * * However the connections between the backend and TCON were assumed * to be always singular, and their endpoit IDs were all incorrectly * set to 0. This means for these old device trees, we cannot just look * up the remote endpoint ID of a TCON input endpoint. TCON1 would be * incorrectly identified as TCON0. * * This function first checks if the TCON node has 2 input endpoints. * If so, then the device tree is a corrected version, and it will use * sun4i_tcon_of_get_id() and sun4i_tcon_get_engine_by_id() from above * to fetch the ID and engine directly. If not, then it is likely an * old device trees, where the endpoint IDs were incorrect, but did not * have endpoint connections between the backend and TCON across * different display pipelines. It will fall back to the old method of * traversing the of_graph to try and find a matching engine by device * node. * * In the case of single display pipeline device trees, either method * works. */ static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv, struct device_node *node) { struct device_node *port; struct sunxi_engine *engine; port = of_graph_get_port_by_id(node, 0); if (!port) return ERR_PTR(-EINVAL); /* * Is this a corrected device tree with cross pipeline * connections between the backend and TCON? */ if (of_get_child_count(port) > 1) { /* Get our ID directly from an upstream endpoint */ int id = sun4i_tcon_of_get_id_from_port(port); /* Get our engine by matching our ID */ engine = sun4i_tcon_get_engine_by_id(drv, id); of_node_put(port); return engine; } /* Fallback to old method by traversing input endpoints */ of_node_put(port); return sun4i_tcon_find_engine_traverse(drv, node, 0); } static int sun4i_tcon_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct sun4i_drv *drv = drm->dev_private; struct sunxi_engine *engine; struct device_node *remote; struct sun4i_tcon *tcon; struct reset_control *edp_rstc; bool has_lvds_rst, has_lvds_alt, can_lvds; int ret; engine = sun4i_tcon_find_engine(drv, dev->of_node); if (IS_ERR(engine)) { dev_err(dev, "Couldn't find matching engine\n"); return -EPROBE_DEFER; } tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL); if (!tcon) return -ENOMEM; dev_set_drvdata(dev, tcon); tcon->drm = drm; tcon->dev = dev; tcon->id = engine->id; tcon->quirks = of_device_get_match_data(dev); tcon->lcd_rst = devm_reset_control_get(dev, "lcd"); if (IS_ERR(tcon->lcd_rst)) { dev_err(dev, "Couldn't get our reset line\n"); return PTR_ERR(tcon->lcd_rst); } if (tcon->quirks->needs_edp_reset) { edp_rstc = devm_reset_control_get_shared(dev, "edp"); if (IS_ERR(edp_rstc)) { dev_err(dev, "Couldn't get edp reset line\n"); return PTR_ERR(edp_rstc); } ret = reset_control_deassert(edp_rstc); if (ret) { dev_err(dev, "Couldn't deassert edp reset line\n"); return ret; } } /* Make sure our TCON is reset */ ret = reset_control_reset(tcon->lcd_rst); if (ret) { dev_err(dev, "Couldn't deassert our reset line\n"); return ret; } if (tcon->quirks->supports_lvds) { /* * This can only be made optional since we've had DT * nodes without the LVDS reset properties. * * If the property is missing, just disable LVDS, and * print a warning. */ tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); if (IS_ERR(tcon->lvds_rst)) { dev_err(dev, "Couldn't get our reset line\n"); return PTR_ERR(tcon->lvds_rst); } else if (tcon->lvds_rst) { has_lvds_rst = true; reset_control_reset(tcon->lvds_rst); } else { has_lvds_rst = false; } /* * This can only be made optional since we've had DT * nodes without the LVDS reset properties. * * If the property is missing, just disable LVDS, and * print a warning. */ if (tcon->quirks->has_lvds_alt) { tcon->lvds_pll = devm_clk_get(dev, "lvds-alt"); if (IS_ERR(tcon->lvds_pll)) { if (PTR_ERR(tcon->lvds_pll) == -ENOENT) { has_lvds_alt = false; } else { dev_err(dev, "Couldn't get the LVDS PLL\n"); return PTR_ERR(tcon->lvds_pll); } } else { has_lvds_alt = true; } } if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) { dev_warn(dev, "Missing LVDS properties, Please upgrade your DT\n"); dev_warn(dev, "LVDS output disabled\n"); can_lvds = false; } else { can_lvds = true; } } else { can_lvds = false; } ret = sun4i_tcon_init_clocks(dev, tcon); if (ret) { dev_err(dev, "Couldn't init our TCON clocks\n"); goto err_assert_reset; } ret = sun4i_tcon_init_regmap(dev, tcon); if (ret) { dev_err(dev, "Couldn't init our TCON regmap\n"); goto err_free_clocks; } if (tcon->quirks->has_channel_0) { ret = sun4i_dclk_create(dev, tcon); if (ret) { dev_err(dev, "Couldn't create our TCON dot clock\n"); goto err_free_clocks; } } ret = sun4i_tcon_init_irq(dev, tcon); if (ret) { dev_err(dev, "Couldn't init our TCON interrupts\n"); goto err_free_dotclock; } tcon->crtc = sun4i_crtc_init(drm, engine, tcon); if (IS_ERR(tcon->crtc)) { dev_err(dev, "Couldn't create our CRTC\n"); ret = PTR_ERR(tcon->crtc); goto err_free_dotclock; } if (tcon->quirks->has_channel_0) { /* * If we have an LVDS panel connected to the TCON, we should * just probe the LVDS connector. Otherwise, just probe RGB as * we used to. */ remote = of_graph_get_remote_node(dev->of_node, 1, 0); if (of_device_is_compatible(remote, "panel-lvds")) if (can_lvds) ret = sun4i_lvds_init(drm, tcon); else ret = -EINVAL; else ret = sun4i_rgb_init(drm, tcon); of_node_put(remote); if (ret < 0) goto err_free_dotclock; } if (tcon->quirks->needs_de_be_mux) { /* * We assume there is no dynamic muxing of backends * and TCONs, so we select the backend with same ID. * * While dynamic selection might be interesting, since * the CRTC is tied to the TCON, while the layers are * tied to the backends, this means, we will need to * switch between groups of layers. There might not be * a way to represent this constraint in DRM. */ regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, SUN4I_TCON0_CTL_SRC_SEL_MASK, tcon->id); regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG, SUN4I_TCON1_CTL_SRC_SEL_MASK, tcon->id); } list_add_tail(&tcon->list, &drv->tcon_list); return 0; err_free_dotclock: if (tcon->quirks->has_channel_0) sun4i_dclk_free(tcon); err_free_clocks: sun4i_tcon_free_clocks(tcon); err_assert_reset: reset_control_assert(tcon->lcd_rst); return ret; } static void sun4i_tcon_unbind(struct device *dev, struct device *master, void *data) { struct sun4i_tcon *tcon = dev_get_drvdata(dev); list_del(&tcon->list); if (tcon->quirks->has_channel_0) sun4i_dclk_free(tcon); sun4i_tcon_free_clocks(tcon); } static const struct component_ops sun4i_tcon_ops = { .bind = sun4i_tcon_bind, .unbind = sun4i_tcon_unbind, }; static int sun4i_tcon_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; const struct sun4i_tcon_quirks *quirks; struct drm_bridge *bridge; struct drm_panel *panel; int ret; quirks = of_device_get_match_data(&pdev->dev); /* panels and bridges are present only on TCONs with channel 0 */ if (quirks->has_channel_0) { ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge); if (ret == -EPROBE_DEFER) return ret; } return component_add(&pdev->dev, &sun4i_tcon_ops); } static int sun4i_tcon_remove(struct platform_device *pdev) { component_del(&pdev->dev, &sun4i_tcon_ops); return 0; } /* platform specific TCON muxing callbacks */ static int sun4i_a10_tcon_set_mux(struct sun4i_tcon *tcon, const struct drm_encoder *encoder) { struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev); u32 shift; if (!tcon0) return -EINVAL; switch (encoder->encoder_type) { case DRM_MODE_ENCODER_TMDS: /* HDMI */ shift = 8; break; default: return -EINVAL; } regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG, 0x3 << shift, tcon->id << shift); return 0; } static int sun5i_a13_tcon_set_mux(struct sun4i_tcon *tcon, const struct drm_encoder *encoder) { u32 val; if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC) val = 1; else val = 0; /* * FIXME: Undocumented bits */ return regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val); } static int sun6i_tcon_set_mux(struct sun4i_tcon *tcon, const struct drm_encoder *encoder) { struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev); u32 shift; if (!tcon0) return -EINVAL; switch (encoder->encoder_type) { case DRM_MODE_ENCODER_TMDS: /* HDMI */ shift = 8; break; default: /* TODO A31 has MIPI DSI but A31s does not */ return -EINVAL; } regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG, 0x3 << shift, tcon->id << shift); return 0; } static const struct sun4i_tcon_quirks sun4i_a10_quirks = { .has_channel_0 = true, .has_channel_1 = true, .set_mux = sun4i_a10_tcon_set_mux, }; static const struct sun4i_tcon_quirks sun5i_a13_quirks = { .has_channel_0 = true, .has_channel_1 = true, .set_mux = sun5i_a13_tcon_set_mux, }; static const struct sun4i_tcon_quirks sun6i_a31_quirks = { .has_channel_0 = true, .has_channel_1 = true, .has_lvds_alt = true, .needs_de_be_mux = true, .set_mux = sun6i_tcon_set_mux, }; static const struct sun4i_tcon_quirks sun6i_a31s_quirks = { .has_channel_0 = true, .has_channel_1 = true, .needs_de_be_mux = true, }; static const struct sun4i_tcon_quirks sun7i_a20_quirks = { .has_channel_0 = true, .has_channel_1 = true, /* Same display pipeline structure as A10 */ .set_mux = sun4i_a10_tcon_set_mux, }; static const struct sun4i_tcon_quirks sun8i_a33_quirks = { .has_channel_0 = true, .has_lvds_alt = true, }; static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = { .supports_lvds = true, .has_channel_0 = true, }; static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = { .has_channel_1 = true, }; static const struct sun4i_tcon_quirks sun8i_v3s_quirks = { .has_channel_0 = true, }; static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = { .has_channel_0 = true, .needs_edp_reset = true, }; static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = { .has_channel_1 = true, .needs_edp_reset = true, }; /* sun4i_drv uses this list to check if a device node is a TCON */ const struct of_device_id sun4i_tcon_of_table[] = { { .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks }, { .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks }, { .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks }, { .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks }, { .compatible = "allwinner,sun7i-a20-tcon", .data = &sun7i_a20_quirks }, { .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks }, { .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks }, { .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks }, { .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks }, { .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks }, { .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks }, { } }; MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table); EXPORT_SYMBOL(sun4i_tcon_of_table); static struct platform_driver sun4i_tcon_platform_driver = { .probe = sun4i_tcon_probe, .remove = sun4i_tcon_remove, .driver = { .name = "sun4i-tcon", .of_match_table = sun4i_tcon_of_table, }, }; module_platform_driver(sun4i_tcon_platform_driver); MODULE_AUTHOR("Maxime Ripard "); MODULE_DESCRIPTION("Allwinner A10 Timing Controller Driver"); MODULE_LICENSE("GPL");