Device tree configuration for Renesas IIC (sh_mobile) driver Required properties: - compatible : - "renesas,iic-r8a73a4" (R-Mobile APE6) - "renesas,iic-r8a7740" (R-Mobile A1) - "renesas,iic-r8a7743" (RZ/G1M) - "renesas,iic-r8a7745" (RZ/G1E) - "renesas,iic-r8a774a1" (RZ/G2M) - "renesas,iic-r8a774c0" (RZ/G2E) - "renesas,iic-r8a7790" (R-Car H2) - "renesas,iic-r8a7791" (R-Car M2-W) - "renesas,iic-r8a7792" (R-Car V2H) - "renesas,iic-r8a7793" (R-Car M2-N) - "renesas,iic-r8a7794" (R-Car E2) - "renesas,iic-r8a7795" (R-Car H3) - "renesas,iic-r8a7796" (R-Car M3-W) - "renesas,iic-r8a77965" (R-Car M3-N) - "renesas,iic-r8a77990" (R-Car E3) - "renesas,iic-sh73a0" (SH-Mobile AG5) - "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1 compatible device) - "renesas,rcar-gen3-iic" (generic R-Car Gen3 or RZ/G2 compatible device) - "renesas,rmobile-iic" (generic device) When compatible with a generic R-Car version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic R-Car version. When compatible with "renesas,rmobile-iic" it should be the last compatibility string listed. The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E) controllers are not considered compatible with "renesas,rcar-gen3-iic" or "renesas,rmobile-iic" due to the absence of automatic transmission registers. - reg : address start and address range size of device - interrupts : interrupt of device - clocks : clock for device - #address-cells : should be <1> - #size-cells : should be <0> Optional properties: - clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset. - dmas : Must contain a list of two references to DMA specifiers, one for transmission, and one for reception. - dma-names : Must contain a list of two DMA names, "tx" and "rx". Pinctrl properties might be needed, too. See there. Example: iic0: i2c@e6500000 { compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; };